home | electrical | mechanical | environmental | marking | request a quote or sample | resources | all oscillators search! new ep26 series alternative we now offer a lower cost, quicker delivery alternative to the ep26 series oscillator (50 and 100 ppm only). our new mems oscillator is available in 2 days for samples and 5 to 10 days for quantities up to 10,000 pcs. all frequencies from 1.000mhz to 125.000mhz are offered at the same low cost. click here for the alternative emk13 series ep26 series programmable oscillator check stock quote/sample l rohs compliant (pb-free) l epo ? programmable oscillators l ceramic surface mount package l lvhcmos output l 3.3v supply voltage l stability to 50ppm l available on tape & reel electrical specifications nominal frequency 1.000mhz to 106.250mhz frequency tolerance/stability (inclusive of all conditions: calibration tolerance at 25c, frequency stability over the operating temperature range, supply voltage change, output load change, first year aging at 25c, shock, and vibration.) 100ppm maximum (standard) 50ppm maximum operating temperature range -20c to +70c (standard) -40c to +85c
supply voltage (v dd ) 3.3v dc 0.3v dc input current 28ma maximum (unloaded) disable current (tri-state option) 16ma maximum (pin 1 = ground) standby current (power down option) 20a maximum (pin 1 = ground) output voltage logic high (v oh ) v dd -0.4v dc minimum (i oh =-8ma) output voltage logic low (v ol ) 0.4v dc maximum (i ol =+8ma) duty cycle measured at 50% of waveform. 50 10(%) (standard) 50 5(%) (optional) available from 1 to 50mhz rise time/fall time measured from 20% to 80% of waveform. 4nsec maximum load drive capability 30pf hcmos load maximum from 1.000mhz to 50.000mhz 15pf hcmos load maximum from 50.001mhz to 106.250mhz aging (at 25c) 5ppm/year maximum storage temperature -55c to +125c output control function tri-state enable high or power down input voltage 70% of v dd or greater or no connection to enable output. 20% of v dd or less to disable output (high impedance state for tri-state. logic low for power down). jitter absolute: 250psec maximum, 100psec typical less than or equal to 33mhz 125psec maximum, 75psec typical above 33mhz one sigma:50psec maximum less than or equal to 33mhz 40psec maximum greater than 33mhz start up time 10msec maximum top of page
mechanical dimensions all dimensions in millimeters pin 1: power down or tri-state pin 3: output pin 2: case ground pin 4: supply voltage top of page part number constructor / request a quote or sample please note that this form is intended to provide a listing of standard options. if you require an option or configuration that is not present here, you may want to fill out our custom oscillator part number request form. if you have any trouble with this form, or just have a suggestion as to how it might be improved, please contact our webmaster. enter your part number: - or - frequency in megahertz (1 to 106.25): frequency tolerance/stability: operating temperature range: duty cycle: output control function: packaging options:
top of page part numbering guide top of page marking specifications line 1: ecliptek line 2: xx.xxx m l xx.xxx = frequency (5 digits maximum + decimal) l m = frequency unit of measure (mhz) line 3: p xx y zz l p = configuration designator l xx = ecliptek manufacturing identifier l y = last digit of year l zz = week of year top of page
environmental & mechanical specifications fine leak test: mil-std-883, method 1014, condition a gross leak test: mil-std-883, method 1014, condition c mechanical shock: mil-std-202, method 213, condition c vibration: mil-std-883, method 2007, condition a solderability: mil-std-883, method 2003 temperature cycling: mil-std-883, method 1010 resistance to soldering heat: mil-std-202, method 210 resistance to solvents: mil-std-202, method 215 top of page other resources l frequently asked questions about programmable oscillators l download specification (pdf) l test circuit l recommended solder reflow methods l recommended solder pad layout l tape & reel packaging option l ibis model l oscillator thermal resistance l ecliptek rohs compliance tools & resources top of page category oscillator series ep26 package ceramic voltage 3.3v class os48 revision e 02-20-2004 [ all content copyright ? 2006 ecliptek corporation | legal disclaimer ]
|
